Overview
This mechanism is a push-in to latch and release design. This could be used in a wide variety of applications from cabinets, hoods, caps, etc.
STL Files are available for download for free. Results may vary depending on your printer settings and accuracy. For reference, this was printed using a Bambu A1 Mini Printer using PLA Filament and a 0.4 mm Nozzle. If fitment is a problem, please adjust printer settings or part scale until you find your desired tolerances.
Build List:
From Printer:
1 - Latch and Release Mechanism Base
1 - Latch and Release Mechanism Main Handle
1 - Latch and Release Mechanism Release Bar
1 - Latch and Release Mechanism Release Pin
2 - Latch and Release Mechanism Side Latch
Hardware or Non-Printed Parts:
2 - M4*20mm Screws
1 - M4*26mm Screw
3 - M4*8mm Threaded Inserts
3 - Compression Springs
Some Assembly Required
***Note there is no top to this latch - it is an open design. If a top is desired, please fill out a contact form so we can work on providing that.
Overview
This mechanism is a push-in to latch and release design. This could be used in a wide variety of applications from cabinets, hoods, caps, etc.
STL Files are available for download for free. Results may vary depending on your printer settings and accuracy. For reference, this was printed using a Bambu A1 Mini Printer using PLA Filament and a 0.4 mm Nozzle. If fitment is a problem, please adjust printer settings or part scale until you find your desired tolerances.
Build List:
From Printer:
1 - Latch and Release Mechanism Base
1 - Latch and Release Mechanism Main Handle
1 - Latch and Release Mechanism Release Bar
1 - Latch and Release Mechanism Release Pin
2 - Latch and Release Mechanism Side Latch
Hardware or Non-Printed Parts:
2 - M4*20mm Screws
1 - M4*26mm Screw
3 - M4*8mm Threaded Inserts
3 - Compression Springs
Some Assembly Required
***Note there is no top to this latch - it is an open design. If a top is desired, please fill out a contact form so we can work on providing that.
